Congratulations! And welcome to future of hygiene with the BidetKing Crown. 

Play the video below for a step by step video walkthrough of the installation process. 

INSTALL TIP: Don't insert batteries into the remote control until after the Crown is installed.  After you power on the Crown by plugging in the electrical cord, insert batteries into the remote control after the startup sequence within 5 minutes. This will automatically pair the radio frequency remote control with the seat.

Having trouble pairing the remote control after the Crown is installed?

The Crown's remote control uses radio frequency so it needs to pair with the Crown during the seat's start up phase. Please perform these steps carefully in order to pair the seat/remote:

  1. Unplug the bidet seat from the electrical outlet
  2. Then, open the battery panel in the back of the remote control and remove the batteries. Double check that the metal battery contacts are positioned correctly and not out of place.
  3. Plug the bidet seat into the electrical outlet and wait 30 seconds for it to finish initializing
  4. Put the batteries back into the remote control within 5 minutes of the bidet seat starting up
  5. The remote control and seat will automatically pair and re-establish a connection

Newsletter

A short sentence describing what someone will receive by subscribing