Questions:
- 0voteA:
The GoBIdet is designed to fit most toilets, even those with a French curve. Most of the time it works but every now and then we come across a toilet that doesn't work.
Posted byon Monday, March 18, 2019
- 0voteA:
Yes the mounting arm is meant to pivot to allow for a better range of motion.
Posted byon Thursday, March 7, 2019
- 0voteA:
All of the hoses and necessary installation parts are included with the GoBidet 2003C. Thanks!
Posted byon Tuesday, March 27, 2018
- 0voteA:
Hi Patricia, yes bumpers would certainly help as these under seat type bidet attachments need a gap between the seat and the bowl for best results.
Posted byon Monday, September 11, 2017
- 0voteA:
Hello,
There's a small hole in the back of the pressure handle that will allow you to insert a small screwdriver to tighten that screw.
Posted byon Tuesday, August 29, 2017
- 0voteA:
Hello,
Yes, installation of the GoBidet 2003c bidet attachment is the same for 1 piece toilets except that you use the mouting hole at the end of the mounting arm instead of the default one.
Otherwise, installation is identical.
Thank you
Posted byon Friday, January 6, 2017
- 0voteA:
Hi Stefan,
Yes, the GoBidet should operate perfectly fine in your situation. So long as you can get decent water pressure in the rest of your bathroom faucets/showers, the GoBidet should have no isses.
Let us know if you have any other questions or concerns.
Best,
BidetKing.com
Posted byon Wednesday, October 5, 2016
- 0voteA:
Hi William,
Thank you for your inquiry into the GoBidet 2003C bidet attachment.
The unit requires about 4-5" of space on the right side of the toilet (when seated) to use comfortably.
Let us know if you have anymore questions or concerns.
Thank you!
BidetKing.comPosted byon Wednesday, October 5, 2016
- 0voteA:
Hi Dale,
The GoBidet 2003C can only be mounted on the left hand side of the toilet (when facing the toilet). Therefore the user will need their right hand to operate the unit.
Thank you!
BidetKing.comPosted byon Wednesday, October 5, 2016
- 0voteA:
Hi Frank,
Yes, the GoBidet bidet attachment is actually capable of very strong water pressure. With some practice, you could certainly use it for an enema effect as well.
Thanks,
BidetKing.com
Posted byon Wednesday, October 5, 2016
- 0voteA:
Hi Carrie,
If you're using the GoBidet 2003C Hot water kit to connect underneath your sink, your faucet would not have to be turned on to get hot water. The kit will tap into the hot water source before it reaches your sink faucet, so the operation would be independent.
Thank you!
BidetKing.comPosted byon Wednesday, October 5, 2016
- 0voteA:
Hello,
The Gobidet 2003c is designed to work with you existing toilet seat. No need to go buy a special seat just to install this unit.
Let us know if you have anymore questions!
Thank you,
BIdetKing.com
Posted byon Wednesday, October 5, 2016
- 0voteA:
Hi Henry,
Yes we have spare parts available for the GoBidet 2003c. We will send you an email with the pricing.
Thanks,
BidetKing.com
Posted byon Wednesday, October 5, 2016
- 0voteA:
Hi Ed,
The GoBidet 2003C is plated with Chrome so the best way to clean it without causing corrosion would be to use warm water and a mild soap or vinegar. Avoid bleach or other harsh chemicals like alcohol as these can slowly corrode the metal. For the nozzle, a soft brush like a toothbrush would be ideal.
Thanks,
BidetKing.com
Posted byon Wednesday, October 5, 2016
- 0voteA:
Hi Richard,
The water input on the back of the GoBidet will remain unchanged so you can re-use your existing connections if they are still in good condition.
Best,
BidetKing.com
Posted byon Wednesday, October 5, 2016
- 0voteA:
Hi James,
The cool thing about the GoBidet is that the arm can really be swung into any position. So you could achieve either a front or back wash pretty easily by just moving the lever and repositioning the swing arm.
Let us know if you have anymore questions or concerns.
Thank you,
BidetKing.com
Posted byon Wednesday, October 5, 2016